| Bone Plate Instruments |
 |
DESCO MINI STRAIGHT PLATES FOR 2MM SCREWS
Cat. No. ORTHO/ 060.02 to 060.09
Thickness : 0.9mm
Width : 5mm
Hole Spacing : 6mm |
 |
 |
DESCO DCP Plates - 2.0mm
Cat. No. ORTHO/ 060.02 to 060.09
Thickness (4 to 6 Holes): 1mm
Width : 5mm
(7 & 8 Holes) : 1.5mm
Hole Spacing : 5mm |
| |
 |
DESCO MINI L PLATE FOR 2MM SCREWS
Cat. No. ORTHO/ 060 Left & Right
Shaft with two holes & head with two holes.
Thickness : 1mm
Width : 5mm
Hole Spacing : 6mm |
| |
 |
DESCO MINI T PLATE FOR 2MM SCREWS
Cat. No. ORTHO/ 062
Shaft with two holes & head with two holes.
Thickness: 1mm
Width: 5mm
Hole Spacing: 6mm |
| |
 |
DESCO QUARTER TUBULAR PLATE FOR 2.7mm SCREWS
Cat. No. ORTHO/ 060 Left & Right
Thickness : 1mm
Width : 7mm
Hole Spacing : 8mm |
| |
 |
DESCO QUARTER TUBULAR PLATE FOR 2.7mm SCREWS
Cat. No. ORTHO/ 044.02 to 044.09
Thickness : 1mm
Width : 7mm
Hole Spacing :7mm |
| |
 |
DESCO ST. RECONSTRUCTION PLATE FOR 2.7mm SCREWS
Cat. No. ORTHO/ 042
Thickness :3.1 1mm
Width : 8mm
Hole Spacing : 8mm |
| |
 |
DESCO ONE THIRD TUBULAR PLATES
Cat. No. ORTHO/ 045.02 to 045.10
Used as buttress plate for fibula, metatarsals and metarcarpals.
Fixation with 3.5 & 4mm screws.
Compression effect can be achieved by eccentric insertion of remote screws.
Thickness : 1mm
Width : 9mm
Hole Spacing : 12mm & 16mm (One-third tube 12mm dia.) |
| |
 |
DESCO SMALL T-PLATES, RIGHT ANGLED
Cat. No. ORTHO/ 104.03 to 104.08
For the Left and Right Radius. Fixation with 3.5mm & 4mm screws.
Thickness : 1.2mm
Width : 10mm
Head with three holes. |
| |
 |
DESCO SMALL T-PLATES, OBLIQUE ANGLED
Cat. No. ORTHO/ 104.03 to 104.08
For the Left and Right Radius. Fixation with 3.5mm & 4mm screws.
Thickness : 1.5mm
Width : 10mm
Head with three holes. |
| |
| |
 |
DESCO Y-RECONSTRUCTION PLATES
Cat. No. ORTHO/ 050
Size - No. of Holes
Small - 6 Holes
Medium - 9 Holes
Large
- 12 Holes |
| |
 |
DESCO LIMITED CONTACT DYNAMIC COMPRESSION PLATE
Cat. No. ORTHO/ 033.04 to 033.14
(LC-DCP) FOR 4.5MM SCREWS (NARROW)
Fixation with 4.5 & 6.5mm screws. Undercuts: For reduced vascular damage. The end holes can be used for cancellous bone screws. The LC-DCP holes allow compression in both directions of the longitudinal axis. Indication: As a neutralisation and tension band plate on the tibia (not intended for the femur).
Thickness : 4.6mm
Width : 13.5mm
Hole Spacing : 18mm |
| |
 |
DESCO L-BUTTRESS PLATE 4.5mm FOR RIGHT & LEFT LEG
ORTHO/ 108
With double bend, as buttress for tibial and humeral head fractures.
Left angled for right leg & right angled for left leg.
Thickness : 2mm ,
Width : 16mm |
| |
 |
DESCO 95º CONDYLAR PLATES (DCP)
Cat. No. ORTHO/ 091
With DCP dynamic compression holes and slot for tension device. All condylar plates have an angle of 95° between blade and shaft. The two holes next to the blade are suitable for 6.5mm cancellous bone screws, all other holes are self-compressing holes. Fixation with 4.5mm cortical screws. For fractures in the distal and proximal femoral region as well as for intertrochanteric valgus osteotomy.
Thickness : 5.6mm
Width : 16mm
Hole Spacing : 16mm
U-profile Blade : 6.5x16mm
Shaft Length : 5 Holes = 92mm
7 Holes = 124mm
9 Holes = 156mm
12 Holes = 204mm
14 Holes = 236mm
16 Holes = 268mm
18 Holes = 300mm |
| |
 |
DESCO DHS BARREL PLATES WITH DCP & ROUND HOLES - 130°, 135°, 140°, 145° & 150
Cat. No. ORTHO/ 097
With DCP dynamic compression holes and slot for tension device. Fixation with 4.5mm cortical screws.
For pertrochanteric and intertrochanteric fractures.
Thickness : 5.8mm
Width : 19mm
Hole Spacing : 16mm
Outer Barrel Dia : 12.6mm
Barrel Length : 38mm
Short Barrel Length : 25mm |
| |
 |
DESCO COBRA HEAD PLATE - 4.5 MM
Cat. No. ORTHO/ 093
Shaft with DCP dynamic compression holes and slot for tension device. For arthrodesis of the hip. In the two shaft holes next to the head, two 4.5mm cortical screws, length 68mm, are normally used.
Thickness : 6mm
Width : 16mm
Hole Spacing : 16mm |
| |
| Request for quote >> |
